Tootjad / Hinnad
Genelec aktiivkõlarid ja stuudiomonitorid
Allpool maailmakuulsa Soome professionaalsete stuudiokõlarite-aktiivmonitoride valmistaja Genelec'i toodete hinnakiri seisuga 21.01.2015.
Lisainfo: tootja kodulehekülg
Tarneaeg: reeglina umbes 1 nädal.
2013-2014 aasta jooksul lisandus Geneleci tootevalikusse päris palju uudistooteid: kodukasutuseks mõeldud G seeria aktiivkõlarid G One, G Two, G Three ja G Four ja F-seeria subwoofrid F One ja F Two ning samuti peamiselt kodustuudiotesse mõeldud uue M-seeria M030 ja M040 aktiivmonitorid.Viimaste juures on uuendused väga suured: uued on kasutatavad elemendid, uus on kõlarite korpuse materjal, uus on bassiava paigutus ja ehitus - see on nüüd suunatud kõlari alla.
Lisainfot uute seeriate kohta saate siit: G ja F seeria koduleht, M-seeria koduleht
Professionaalsemaks kasutuseks mõeldud toodete puhul toimus samuti rida mudeliuuendusi: 6010A asemele tuli 6010B, 8020B asemele 8020C, 8030A asemele 8030B, 8040A asemele 8040B ja 8050A asemele 8050B. Muutuse tingib EU direktiiv, mis piirab seadmete voolutarvet ja selle täitmiseks tehti nende kõlarite võimendite toite-osas väikeseid muutusi lisades Intelligent Signal Sensing moodul, mis lülitab sisendsignaali puududes kõlarid ootereziimile.
Kodukasutuseks mõeldud aktiivkõlarid.
Hind on tootja poolne soovituslik hind koos käibemaksuga. meie hinna teada saamiseks külastage salongi või küsige pakkumist.
| SEERIA/MUDEL | KIRJELDUS | SOOVITUSLIK HIND /TÜKK |
|---|---|---|
| G Series - Active Loudspeakers | ||
| G1AMM | GENELEC G One, Compact active 2-way loudspeaker | 290 |
| Solid die-cast aluminium MDE™ (Minimum Diffraction Enclosure) cabinet including DCW™ Protection grills, 76 mm (3 in) LF and 19 mm (.75 in) HF drive units. RCA input connector. Integrated crossover and amplifiers - 12W and 12W. Room response controls on rear panel. On-Off switch on the back panel. Intelligent signal sensing power management. Autostart / automatic on/off power sensing. RCA-RCA and 3,5mm-RCA cables included. Iso-Pod™ table support included. Painted Black finish. Weight 1,4 kg. | ||
| G1AWM | G One with Painted White finish | 290 |
| G2AMM | GENELEC G Two, Compact active 2-way loudspeaker | 450 |
| Solid die-cast aluminium MDE™ (Minimum Diffraction Enclosure) cabinet including DCW™ Protection grills, 100 mm (4 in) LF and 19 mm (.75 in) HF drive units. RCA input connector. Integrated crossover and amplifiers - 20W and 20W. Room response controls on rear panel. On-Off switch in the back. On/off function for the power-on led. Intelligent signal sensing power management. Autostart / automatic on/off power sensing. RCA-RCA and 3,5mm-RCA cables included. Iso-Pod™ table support included. Painted Black finish. Weight 3,7 kg. | ||
| G2AWM | G Two with Painted White finish | 450 |
| G3AMM | GENELEC G Three, Compact active 2-way loudspeaker | 675 |
| Solid die-cast aluminium MDE™ (Minimum Diffraction Enclosure) cabinet including DCW™ Protection grills, 130 mm (5 in) LF and 19 mm (.75 in) HF drive units. RCA and balanced XLR input connectors. Integrated crossover and amplifiers - 40W and 40W. Room response controls on rear panel. On-Off switch in the back. Intelligent signal sensing power management. On/off function for the power-on led. Autostart / automatic on/off power sensing. Iso-Pod™ table support included. Painted Black finish. Weight 5,6 kg. | ||
| G3AWM | G Three with Painted White finish. | 689 |
| G4AMM | GENELEC G Four, Active 2-way loudspeaker.. | 1075 |
| Solid die-cast aluminium MDE™ (Minimum Diffraction Enclosure) cabinet including DCW™ Protection grills, 165 mm (6.5 in) LF and 25 mm (1 in) HF drive units. RCA and balanced XLR input connectors. Integrated crossover and amplifiers - 90W and 90W. Room response controls on rear panel. On-Off switch in the back. Intelligent signal sensing power management. On/off function for the power-on led. Autostart / automatic on/off power sensing. Iso-Pod™ table support included. Painted Black finish. Weight 8,6 kg. | ||
| G4AWM | G Four with Painted White finish. | 1075 |
| G5AMM | GENELEC G Five, Active 2-way loudspeaker. | 1650 |
| Solid die-cast aluminium MDE™ (Minimum Diffraction Enclosure) cabinet including DCW™ Protection grills, 205 mm (8 in) LF and 25 mm (1 in) HF drive units. RCA and balanced XLR input connectors. Integrated crossover and amplifiers - 150W and 120W. Room response controls on rear panel. On-Off switch in the back. Intelligent signal sensing power management. On/off function for the power-on led. Autostart / automatic on/off power sensing. Iso-Pod™ table support included. Painted Black finish. Weight 12,7 kg. | ||
| G5AWM | G Five with Painted White finish | 1650 |
| F Series - Active Subwoofers | ||
| F1AMM | GENELEC F One Active subwoofer | 575 |
| Deep drawn steel cabinet with optimized reflex port. Wireless volume control system included. Single 165 mm (6,5 in) long throw cone driver to produce up to 98 dB SPL in half space. Autostart / automatic on/off power sensing. Intelligent signal sensing power management. RCA input and output connectors. 40W amplifier with very low THD and IM distortion. Painted Black finish. Weight 6,3 kg. | ||
| F1AWM | F One with Painted White finish | 575 |
| F2AMM | GENELEC F Two Active subwoofer | 1150 |
| Deep drawn steel cabinet with optimized reflex port. Wireless volume control system included. Single 205 mm (8 in) long throw cone driver to produce up to 102 dB SPL in half space. Autostart / automatic on/off power sensing. Intelligent signal sensing power management. Link out, 5xRCA and 2x balanced XLR input and output connectors. 150W class-D amplifier with very low THD and IM distortion. Painted Black finish. Weight 9,8 kg. | ||
| F2AWM | F Two with Painted White finish | 1150 |
| Active In-Wall Loudspeaker System | ||
| AIW25 | AIW25 Two-Way Active In-Wall Loudspeaker System | 1099 |
| Loudspeaker cabinet contains 130 mm (5 in) LF and 19 mm (3/4 in) HF drive units and Directivity Control Waveguide™ (DCW™). Outboard RAM2 unit contains crossover, room response controls and amplifier modules, 40W + 40W. XLR balanced and RCA unbalanced input connectors, and XLR link output. Autostart capable, with a connector strip for 12 V trigger and signal sensing auto-On/Off circuit. Paintable white perforated grille included. Separate loudspeaker cables should be specified (not included). Weight 3,7 kg and 2,2 kg | ||
| AIW26 | AIW26 Two-Way Active In-Wall Loudspeaker System | 2099 |
| Loudspeaker cabinet contains 170 mm (6.5 in) LF and 19 mm (3/4 in) HF drive units and Directivity Control Waveguide™ (DCW™). Outboard RAM1 unit contains crossover, room response controls and amplifier modules, 120W + 120W. XLR balanced and RCA unbalanced input connectors. | ||
| AIC25 | AIC25 Two-Way Active In-Ceiling Loudspeaker System | 999 |
| Circular loudspeaker cabinet contains 130 mm (5 in) LF and 19 mm (3/4 in) HF drive units. Outboard RAM2 unit contains crossover, room response controls and amplifier modules, 40W + 40W. XLR balanced and RCA unbalanced input connectors, and XLR link output. Autostart capable, with a connector strip for 12 V trigger and signal sensing auto-On/Off circuit. Paintable white perforated grille included. Separate loudspeaker cables should be specified (not included). Weight 3 kg and 2,2 kg | ||
| 5041APM | 5041A Active In Wall Subwoofer System | 1799 |
| In-wall loudspeaker cabinet with dual 170 mm (6.5 in) active drivers. Outboard RAM 3 amplifier unit, 125W, sub-link feature, XLR balanced and RCA unbalanced input connectors and XLR link out. Level and phase controls. Signal sensing auto-On/Off circuit and a connector strip for 12 V trigger remote control. Durable black painted finish. Weight 15 kg and 1,4 kg | ||
| Two-Way Active Loudspeaker Systems | ||
| HT206BPM | HT206B Two-way Active Loudspeaker System | |
| 170 mm (6.5 in) LF and 19 mm (3/4 in) HF drive units and Directivity Control Waveguide™ (DCW™). Integrated crossover and amplifiers - 80 W and 50 W. Overload protection circuitry. Room response controls on rear panel. XLR balanced and RCA unbalanced connectors. Autostart capable with a connector strip for 12 V trigger or contact closure. Signal sensing auto-On/Off circuit. Durable black painted finish. Weight 7,6 kg | ||
| HT206BWM | As HT206BPM above but in painted white finish. | |
| HT208BPM | HT208B Two-way Active Loudspeaker System | |
| 210 mm (8 in) LF and 25 mm (1 in) HF drive units and Directivity Control Waveguide™ (DCW™). Integrated crossover and amplifiers - 120 W and 120 W. Overload protection circuitry. Room response controls on rear panel. XLR balanced and RCA unbalanced connectors. Autostart capable with a connector strip for 12 V trigger or contact closure. Signal sensing auto-On/Off circuit. Durable black painted finish. Weight 12,7 kg | ||
| HT210BPM | HT210B Two-way Active Loudspeaker System | 1999 |
| 250 mm (10 in) LF and 25 mm (1 in) HF drive units and Directivity Control Waveguide™ (DCW™). Integrated crossover and amplifiers - 180 W and 120 W. Overload protection circuitry. Room response controls on rear panel. XLR balanced and RCA unbalanced connectors. Autostart capable with a connector strip for 12 V trigger or contact closure. Signal sensing auto-On/Off circuit. Durable black painted finish. Weight 21,7 kg | ||
| Three-Way Active Loudspeaker Systems | ||
| HT312BPM | HT312B Three-way Active Loudspeaker System. | 4999 |
| Loudspeaker enclosure with 300 mm (12 in) LF, 130 mm (5 in) MF and 25 mm (1 in) HF drive units. Directivity Control Waveguide™ (DCW™). Durable black painted cabinet finish. Amplifier; RAM4 19" 3U amplifier 180 W, 120 W, and 120 W. (*) Remote power switching connectors for 12 V trigger or contact closure switch. Signal sensing auto-On/Off circuit. Weight 33 kg and 12,3 kg | ||
| AOW312B | AOW312B Three-Way Active On-Wall Loudspeaker System | 7499 |
| On-wall loudspeaker cabinet equipped with 300 mm (12 in) LF, 130 mm (5 in) MF and 25 mm (1 in) HF drive units and Directivity Control Waveguide™ (DCW™). Durable black painted finish cabinet. Wall mounting hardware is included. Amplifier; RAM4 19" 3U amplifier 180 W, 120 W and 120 W. (*) Remote power switching connectors for 12 V trigger or contact closure switch. Signal sensing auto-On/Off circuit. Weight 43 kg and 12 kg. Separate loudspeaker cable should be specified or pre-made cables ordered separately (not included). | ||
| HT315BPM | HT315B Three-way Active Loudspeaker System. | 7799 |
| Loudspeaker enclosure with 380 mm (15 in) LF, 130 mm (5 in) MF and 25 mm (1 in) HF drive units. Directivity Control Waveguide™ (DCW™). Durable black painted cabinet finish. Amplifier; RAM5 19" 3U amplifier 400 W, 120 W, and 120 W. (*) Remote power switching connectors for 12 V trigger. or contact closure switch. Signal sensing auto-On/Off circuit. Weight 52 kg and 15 kg | ||
| HT320BCM | HT320BC Centre Channel Three-way Active Loudspeaker System | 8599 |
| Loudspeaker enclosure with Dual 250 mm (10 in) LF, 130 mm (5 in) MF and 25 mm (1 in) HF drive units. Directivity Control Waveguide™ (DCW™). Durable black painted cabinet finish. Amplifier; RAM5 19" 3U amplifier 2 x 200 W, 120 W, and 120 W. (*) Remote power switching connectors for 12 V trigger or contact closure switch. Signal sensing auto-On/Off circuit. Weight 60 kg and 15 kg | ||
| HT324AM | HT324A Three-way Main Active Loudspeaker System | 11999 |
| Flush mount design. Dual 300 mm (12 in) LF, 130 mm (5 in) MF, and 25 mm (1 in) HF drive units. System includes loudspeaker enclosure in black painted veneer finish, a single 19" electronic rack with crossovers, room response controls and amplifier modules. Amplification 2 x 400 W, 350 W, and 120 W. Remote power switching connectors for 12 V trigger voltage. A 10 m loudspeaker cable is included. Weight 73 kg and 30 kg | ||
| HT324ACM | HT324AC Centre Channel Main Active Loudspeaker System.. | 12999 |
| Flush mount design. Dual 300 mm (12 in) LF, 130 mm (5 in) MF, and 25 mm (1 in) HF drive units. System includes loudspeaker enclosure in black painted veneer finish, a single 19" electronic rack with crossovers, room response controls and amplifier modules. Amplification 2 x 400 W, 350 W, and 120 W. Remote power switching connectors for 12 V trigger voltage. A 10 m loudspeaker cable is included. Weight 84 kg and 30 kg | ||
| HT330AM | HT330A Three-way Main Active Loudspeaker System. | 14499 |
| Flush mount design. Dual 380 mm (15 in) LF, 130 mm (5 in) MF, and 25 mm (1 in) HF drive units. System includes loudspeaker enclosure in black painted veneer finish, a single 19" electronic rack with crossovers, room response controls and amplifier modules. Amplification 2 x 400 W, 350 W, and 120 W. Remote power switching connectors for 12 V trigger voltage. A 10 m loudspeaker cable is included. Weight 115 kg and 30 kg | ||
| Active Subwoofer Systems | ||
| HTS3B | HTS3B Active Subwoofer System | 2299 |
| With single 250 mm (10 in) active driver and dual 250 mm (10 in) passive radiators. Amplifier 200 W, sub-link feature, XLR balanced and RCA unbalanced input connectors level and phase controls. Autostart capable with a connector strip for 12 V trigger or contact closure. Signal sensing auto-On/Off circuit. Durable black painted finish. Weight 28 kg | ||
| HTS4B | HTS4B Active Subwoofer System | 2599 |
| With single 300 mm (12 in) active driver and dual 300 mm (12 in) passive radiators. Amplifier 400 W, sub-link feature, XLR balanced and RCA unbalanced input connectors level and phase controls. Autostart capable with a connector strip for 12 V trigger or contact closure. Signal sensing auto-On/Off circuit. Durable black painted finish. Weight 37 kg | ||
| HTS6PM | HTS6 Active Subwoofer System | 6999 |
| With 4 x 300 mm (12 in) active drivers. Amplifier 1000 W, sub-link feature, XLR balanced and RCA unbalanced input connectors, level and phase controls. Autostart capable with a connector strip for 12 V trigger or contact closure. Signal sensing auto-On/Off circuit. Durable black painted finish. Weight 120 kg | ||
| Options for Active Loudspeaker Systems | ||
| 1030-409 | Options for HT206B | 90 |
| Grille, black for HT206BPM and BWM | ||
| 1030-409-V | Grille, white for HT206BPM and BWM | 90 |
| Options for HT208B | ||
| 1031-409 | Grille, black for HT208BPM | 90 |
| Options for HT210B | ||
| 1032-409 | Grille, black for HT210BPM | 90 |
| 1032-409-V | Grille, white for HT210BPM | 90 |
| 1032-460B | Wall mount black, tiltable 15º . | 319 |
| 1037-412 | Rack Mount Adapter for amplifier unit (without cables) | 289 |
| 1039-203 | Cable 2 m | 159 |
| 1039-204 | Cable 5 m | 219 |
| 1039-205 | Cable 10 m | 319 |
| 1039-206 | Cable 15 m | 419 |
| 1039-207 | Cable 20 m | 519 |
| Options for HT312B | ||
| 1037-409 | Grille, black | 159 |
| 1037-412 | Rack Mount Adapter for HT312A amplifier unit (without cables) | 289 |
| 1039-203 | Cable 2 m | 159 |
| 1039-204 | Cable 5 m | 219 |
| 1039-205 | Cable 10 m | 319 |
| 1039-206 | Cable 15 m | 419 |
| 1039-207 | Cable 20 m | 519 |
| Options for HT315B, HT320BC | ||
| 1038-409 | Grille for HT315A, black | 179 |
| 1038-409BC | Grille for HT320AC, black | 179 |
| HT315-400 | Rack Mount Adapter for HT315A amp unit without cables. (HT320AC does not need rack mount adapter) | 269 |
| 1039-203 | Cable 2 m | 159 |
| 1039-204 | Cable 5 m | 219 |
| 1039-205 | Cable 10 m | 319 |
| 1039-206 | Cable 15 m | 419 |
| 1039-207 | Cable 20 m | 519 |
| Options for HT324A and HT324AC | ||
| 1034-409B | Grille for HT324A, black | 119 |
| 1034-409BC | Grille for HT324AC, black | 119 |
| 1039-203 | Cable 2 m | 159 |
| 1039-204 | Cable 5 m | 219 |
| 1039-205 | Cable 10 m | 319 |
| 1039-206 | Cable 15 m | 419 |
| 1039-207 | Cable 20 m | 519 |
| Options for HT330A | ||
| 1039-409B | Grille for HT330A, black | 119 |
| 1039-203 | Cable 2 m | 159 |
| 1039-204 | Cable 5 m | 219 |
| 1039-205 | Cable 10 m | 319 |
| 1039-206 | Cable 15 m | 419 |
| 1039-207 | Cable 20 m | 519 |
| Options for AIW26 | ||
| RAM1-401 | Rack adapter kit for the RAM1 amplifier module. Allows use of 3 x RAM1 units in. a 19" rack unit with a 3U overall height. Two blank panels included. | 299 |
| 272-0005 | Pre-construction Bracket for AIW26. | 15 |
| Options for AIW25, AIC25 and 5041A | ||
| RAM2-405 | A 4U 19" rack unit for mounting 8pcs of RAM2 or RAM3 amplifier modules. One blank panel included | 239 |
| 272-0031 | Blank panel for RAM2-405 (One plate covers one RAM2 or RAM3 space slot). | 15 |
| 272-0030 | Pre-construction Bracket for AIW25 | 25 |
| 272-0039 | Pre-construction Bracket for AIC25. | 25 |
| Options for F1 | ||
| 5040-410B | Wall/Ceiling mount kit for 5040A, adapter plate black | 75 |
| 5040-410W | Wall/Ceiling mount kit for 5040A, adapter plate white | 75 |
| Cable | ||
| 1510-303B | New Hybrid cable Black (Power and line AES/EBU) 100 m reel. | 330 |
| 1510-303W | New Hybrid cable White (Power and line AES/EBU) 100 m reel. | 330 |